Emulsification Pump The homogenizing head connected to the engine rotates at high speed to shear, disperse and impact the material, making the material more delicate and promoting the blending of oil and water.

It is widely used in cream products such as cosmetics, shower gel, sunscreen,

as well as sauces and juices in the food industry, ointments in the pharmaceutical industry, petrochemicals, paints, coatings and inks, etc.
The emulsifier operates stably, has low noise, is easy to clean, and is flexible. It can be used continuously and emulsifies the material in an ultra-fine manner.

Cosmetic production equipment

With the emulsifier, the product research and development of the cosmetics industry will be richer and more diversified.

So how to maintain the cosmetic emulsifier?

- Cleaning and sanitation: Daily cleaning and sanitation of the emulsifier should be done to ensure that the equipment and electrical control system are clean and hygienic.

- Electrical equipment maintenance: The inverter should be well ventilated, dusted and other heat dissipation work. Before electrical maintenance, the main switch should be turned off, the electrical box should be locked with a padlock, and safety signs and safety protection should be done well.

- Heating system: Safety valves should be checked regularly to prevent valves from rusting and failing. Drain valves should be checked regularly to prevent them from being blocked by debris.

- Vacuum system: Check for any stalling and ensure that the water ring system is unobstructed. If the vacuum pump is stalled during use, the vacuum pump should be stopped immediately and restarted after cleaning.

- Sealing system: Mechanical seals should replace the dynamic and static rings regularly, depending on the frequency of equipment use. Double-end mechanical seals should frequently check the cooling system to prevent cooling failure and burning of mechanical seals;

For skeleton seals, appropriate materials should be selected according to the characteristics of the material, and they should be replaced regularly according to the maintenance manual during use.

- Lubrication: For motors and reducers, lubricants should be replaced regularly according to the manual. If they are used frequently, the viscosity and acidity of the lubricants should be checked in advance, and the lubricants should be replaced in advance.

In addition, before using the emulsifier, it is necessary to check whether the equipment is intact, and adjust the parameters such as stirring speed, time and temperature in a timely manner according to the characteristics of the material and process parameters.

Pay attention to protective measures during operation to ensure safe production.

Introduction to cleaning of cosmetic emulsifier:

1. Manual cleaning: Use traditional brushing methods and prepare auxiliary cleaning tools, such as cleaning brushes and cleaning towels.

2. Chemical cleaning: Using cleaning agents to clean the emulsifier is one of the best and fastest cleaning methods.

3. Machine cleaning: The cleaning effect of the machine is cleaner than manual cleaning, and it can sterilize and remove residues more effectively.

The operation method is as follows: Pour the cleaning liquid into the emulsifier, turn on the machine, run the cleaning program, and rinse with clean water again after cleaning.